LA-PSE-30T2.5G-Y is a single port PoE Injector, converts standard 100~240V/AC power into low voltage DC that runs over existing LAN cable to power up IEEE 802.3af/at compliant network accessories.
LA-PSE-30T2.5G-Y is a single port PoE Injector, converts standard 100~240V/AC power into low voltage DC that runs over existing LAN cable to power up IEEE 802.3af/at compliant network accessories.
|
Standards Compliance |
IEEE 802.3 10Base-T Ethernet
IEEE 802.3ab 1000Base-Tx Gbit/s Ethernet
IEEE 802.3bz 2500Base-Tx Gbit/s Ethernet
IEEE 802.3at Power over Ethernet |
|
Connector |
10/100/1000Mbps/2.5G, Shielded RJ45 |
|
Indicators |
AC Power (Red); PoE (Green) |
|
Pin Assignment and Polarity |
1/2(+), 3/6 (-) |
|
Output Power Voltage |
DC48V-57V (Default DC54V) |
|
Power |
Max. 30Watts |
|
Input Power |
AC100~240V, 0.5A, 50/60 Hz |
|
Operating Temperature |
0~45°C |
|
Storage Humidity |
Maximum 95%, non-condensing |
|
Dimensions (L x W x H) |
121mm x 50mm x 36mm |
|
Net Weight |
0.2kg |
Use PoE Injector with PD to expand your network to where there are no power lines or outlets, where you wish to fix devices such as APs, IP Cameras or IP Phones, etc.
Steps
1. Use a CAT5 UTP cable to connect port of Ethernet device to the DATA IN port
2. Connect AC cable with Injector and Socket
3. Connect the PoE OUT port to a PD with CAT5 UTP cable
Note: It is recommended to use CAT5E/CAT6 or better Ethernet cables for 2.5 Gigabit networks, as the quality of the cables can affect transmission speed and quality
| Ordering Information | |
|---|---|
| LA-PSE-30T2.5G-Y | 2.5G PoE injector IEEE802.3af/at PoE+ 30w |
| Date | Version | Description | Download |
|---|---|---|---|
| 2024-06-18 | V3.0 | Datasheet_2.5G PoE Injector 30Watts_LA-PSE-30T2.5G-Y V3.0 KTY.pdf | |
| Photo | Model | Description |
|---|
follow us
