Model No.

LA-SWM2R-10G04C0816-U-AD-L

Ethernet

16x10/100/1000M RJ45, 8x1G Combo, 4x1G/2.5G/10G SFP+

Management Port

1xRJ45 Console port (115200, 8, N,1)

1xUSB 2.0 for configuration and firmware

Standard

IEEE 802.3 10Base-T Ethernet

IEEE 802.3u 100Base-TX Ethernet

IEEE 802.3ab 1000Base-T Ethernet

IEEE 802.3z 1000Base-X Ethernet

IEEE802.3x Flow Control and Back Pressure

IEEE 802.1D Spanning Tree Protocol

IEEE 802.1w Rapid Spanning Tree Protocol

IEEE 802.1Q VLAN

ITU-T G.8032 ERPS

IEEE 802.1X Port Authentication Network Control

IEEE 802.1ab LLDP

IEEE 802.3ad LACP

LED Indicators

P (Power Indicator)

Off: the device is power off or failed; On: the device power on is normal

SYS (System Status Indicator)

Blinking: device initialization; On: device on normal operation

USB (USB Status Indicator)

Off: USB flash drive not or not detected by device

On: USB flash drive is detected by device

Blinking: the device is reading and writing the data from USB flash drive

1-16 (Copper Ports Indicators) Green

Off: ports link down; On: ports link up; Blinking: data on TX/RX

1-16 (Copper speed indicators) Yellow

Off: ports on 10/100M; On: ports on 1000M

17-24 (Copper Ports Indicators) Green

Off: ports link down; On: ports link up; Blinking: data on TX/RX

17-24 (Copper speed indicators) Yellow

Off: ports on 10/100M; On: ports on 1000M

17-24 (Fiber Ports Indicators) Green

Off: ports link down; On: ports link up; Blinking: data on TX/RX

25-28 (Fiber Ports Indicators) Green

Off: ports link down; On: ports link up; Blinking: data on TX/RX

Power Parameter

Input Voltage

DC36-75V + AC100~240V redundant power input

Total Power Consumption

Full loading≤25W;

Over-Current Protection

Support

Layer 2 Functions

Port Aggregation

Support GE port aggregation

Support 2.5GE aggregation

Support 10GE aggregation

Support static aggregation

Support LACP dynamic aggregation

Up to 64 aggregation groups and up to 8 ports per group

Port Features

Support IEEE802.3x flow control

Support interface counters

Support port isolation

Port mirroring (One-to-One, Many-to-One)

Support loop detection (Port-based; VLAN-based)

Support broadcast storm suppression (broadcast; unknown multicast; unknown unicast)

Mac-Address Table Management

Support static Mac-address management

Support dynamic Mac-address Management

Support filtering Mac-address

Support MAC limit based on port and VLAN

Support MAC flapping based on port and VLAN

VLAN

Support access mode; Support trunk mode; Support hybrid mode

VLAN classification

Mac Based VLAN; IP Based VLAN; Protocol Based VLAN

GVRP

Normal mode; Fixed mode; Forbidden mode

QinQ

Port-based QinQ

VLAN-based QinQ (VLAN-stacking; VLAN-mapping)

Flow-based QinQ

LLDP

LLDP (Link Layer Discovery Protocol)

Ring Network Protocol

Support IEEE802.1D-STP

Support IEEE802.1W-RSTP

Support IEEE802.1S-MSTP

Support G.8032 ERPS protocol, single ring, sub-Ring and major ring

Recovery time ≤20ms

L2 Multicast

IGMP Snooping

Support IGMP snooping

Group Address

Support group address

Security Functions

ACL

IP Standard ACL

MAC extend ACL

IP extend ACL

IPv6 ACL

QoS

Support QoS Class, remarking

Support SP, WRR queue scheduling

Ingress port-based rate-limit

Egress port-based rate-limit

Support policy-based QoS

802.1x

Port access control

Mac-address access control

RADIUS server

Port-Security

Port-security

IP Source Guard

IP Port/MAC binding

ARP-check

Support ARP-check and ARP packet filtering for illegal users

Access control

Support Telnet/SSH/HTTP/HTTPS user access control

Management & Maintenance Functions

User Management

Support password protection

Support user authorization management

SNMP

Supporting SNMP V1/V2C/V3 version

Web Management

Web Management

Support HTTP V1.1

Support HTTPS

CLI Management

Console/Telnet command line management

RMON

Support RMON (Remote Monitoring) alarm

Firmware Upgrade

Firmware upgrade

Fault Detection

Ping/Tracerout

Support optical transceiver DDM function

Cable Detection

Support copper port cable detection

NTP

Network Time Protocol

Syslog/Debug

Syslog/Debug

Syslog sends to three servers

Configuration Import/Export

Support FTP/TFTP remote import/export

Support USB import/export

Dual Partition Management

Support dual partition switching

Application Protocol Functions

DHCP Snooping

DHCP snooping trust port

Support remote-id/circuit-id configuration

DHCP option-82

DHCP Client

Support

Telnet Server

Support

Telnet Client

Support

SSH Server

Support

TACACS

Support (the terminal access controller accesses the control system)

sflow

Support network traffic analysis

TFTP

Support TFTP Client

Layer 3 Functions

ARP

ARP table aging

DHCP Server

IPv4 / IPv6

Static routing

Switching Features

Switching Capacity

128Gbps

Packet Forwarding Rate

190.4Mpps

MAC Address Table

16K

VLAN

4K

Buffer

12Mbit

Forwarding Delay

<5us

Jumbo Frame

Support 10Kbytes

MDX/MIDX

Support

Watchdog

Support

Mechanical Structure

Installation Method

Desktop; Rack-mount

Dimension (W x D x H)

440x245x44 mm

Weight

4.0kg

Operating Environment

Operating Temperature

0℃~+ 50℃

Storage Temperature

-10℃~+ 70℃

Relative Humidity

Operation humidity: 10%-90%RH; Storage humidity: 5%-95%RH

Certification

Certificates

CE/RoHS/FCC

MTBF

>100,000 hours