L2+/L3 Managed Switch  

L3 Managed Switch 48xGE RJ45, 4x10G SFP+ Redundant Hot-swap Power Supply

LA-SWM3-10G0448P-2HAC-L

LA-SWM3-10G0448P-2HAC-L is a Layer 3 managed Gigabit PoE switch featuring advanced hardware architecture. They support redundant hot-swap AC power supply,

L3 Managed Switch 48xGE RJ45, 4x10G SFP+ Redundant Hot-swap Power Supply

LA-SWM3-10G0448P-2HAC-L

LA-SWM3-10G0448P-2HAC-L is a Layer 3 managed Gigabit PoE switch featuring advanced hardware architecture. They support redundant hot-swap AC power supply,

LA-SWM3-10G0448P-2HAC-L is a Layer 3 managed Gigabit PoE switch featuring advanced hardware architecture. They support redundant hot-swap AC power supply, which will not affect the normal operation of the switch, specifically designed to handle the demands of high-tech facilities requiring the highest power integrity. The switch also provides fault detection and alarms for power and fans. The fan speed can be automatically adjusted based on temperature changes to better adapt to various environments. The series adopt the front-to-rear airflow to enhance the cooling efficiency. By using overcurrent, overvoltage, and overheating protection technologies, it can achieve device-level and link-level reliability protection.


It delivers full Gigabit access and unparalleled scalability to 10G performance. It provides high-density performance, Layer 3 routing protocol with 336Gbps switching capacity. It provides comprehensive end to end QoS as well as flexible and rich management , security settings, which can meet the high speed, secure and smart requirement for small and medium-size enterprise networks. The powerful network security features also make it perform effective data traffic control for ISP and enterprise VoIP, video streaming, and multicast applications. With total power consumption up to 760W(380W +380W) It offers a rack-mountable, affordable, safe and reliable power solution for SMBs deploying Power over Ethernet networks, or requiring enhanced data security and network traffic management.


Features


 4*1G/2.5G/10G SFP+ ports uplink, 48*10/100/1000M RJ45 ports downlink, 1*RJ45 console port , 1*OOB port and 1* USB 2.0 port for switch basic management and setup

 Offer 500W + 500W redundant hot-swap power supply, Max PoE power budget 380W + 380W

 Complies with IEEE 802.3at, IEEE802.3af standard. Max output power consumption per port can reach 30W

 Automatic power and fan status monitoring and alarming mechanisms

 Automatic fan speed adjustment based on the change in temperature

 Self-protection mechanisms that protect power supply against overcurrent, overvoltage, and overtemperature conditions

 Layer 3 features: Supports static and dynamic routing, RIP, OSPF, BGP4, ECMP, VRRP

 Port aggregation: Supports GE ports, 2.5GE and 10GE port aggregation, static and dynamic aggregation

 VLAN : Supports access, truck , hybrid mode and VLAN classification, including the Mac based VLAN, IP based VLAN and protocol based VLAN

 GVRP: Supports normal mode, fixed mode and forbidden mode

 QinQ:  Supports port-based, VLAN-based and flow-based QinQ

 Port Mirroring: Many to one port mirroring

 Layer 2 ring network protocol: Supports STP, RSTP, MSTP, G.8032 ERPS protocol, single ring, sub ring

 Multicast: Supports IGMP snooping

 QoS: QoS class, remarking, Supports SP, WRR queue scheduling, Ingress/Engress port-based rate-limit and policy-based QoS

 Security: Support Dot1xport authenticationmac authenticationRADIUS service; Support port-security, ip source guardIP/Port/MAC binding, arp-check and ARP packet filtering for illegal users and port isolation

 Management : Supports LLDP, user management and login authentication; SNMPV1/V2C/V3; web managementHTTP1.1HTTPS; Syslog; RMON Remote Monitoringalarm, event and history  record; NTP, temperature monitoring; PingTracerout ,optical transceiver DDM and copper port cable detection function; Supports TFTP Client, Telnet Server, Telnet Client, SSH Server and IPv6 management; PoE management

 Firmware , configure backup/restore through Web GUI, FTP and TFTP



Fixed Port

48x10/100/1000Base-T RJ45

4x1G/2.5G/10GBase-X SFP+

Management Port

1xRJ45 console port (115200,8,N,1)

1xUSB 2.0 for configuration and firmware

1xOOB port for Ethernet management

Standard

IEEE 802.3 10Base-T Ethernet

IEEE 802.3u 100Base-TX Ethernet

IEEE 802.3ab 1000Base-T Ethernet

IEEE 802.3z 1000Base-X Ethernet

IEEE802.3x Flow Control and Back Pressure

IEEE 802.1D Spanning Tree Protocol

IEEE 802.1w Rapid Spanning Tree Protocol

IEEE 802.1Q VLAN

ITU-T G.8032 ERPS

IEEE 802.1X Port Authentication Network Control

IEEE 802.1ab LLDP

IEEE 802.3ad LACP

IEEE 802.3af

IEEE 802.3at

LED Indicators

PWR (Power Indicator)

Off: the device is power off or failed

On: the device power on is normal

SYS (System Status Indicator)

Blinking: device initialization

On: device on normal operation

1-48 

(Copper Ports Indicators) Green

Off: ports link down

On: ports link up

Blinking: data on TX/RX

1-48

(PoE Status Indicators) Yellow

Off: PoE not working

On: PoE working

49-52

(Fiber Ports Indicators) Green

Off: ports link down

On: ports link up

Blinking: data on TX/RX

Power Parameter

Input Voltage

AC100~240V

Frequency: 50/60Hz

Power Supply Slots

2

Maximum Power Consumption

Full loading without PoE40W

PoE power budget 380W + 380W

Fans

3xfans, support automatic fan speed adjustments

Over-current Protection

Support

Layer 2 Functions

Port Aggregation

Support Ge Port Aggregation

Support 2.5Ge Aggregation

Support 10Ge Aggregation

Support Lacp Dynamic Aggregation

Up To 64 Aggregation Groups And Up To 8 Ports Per Group

Port Features

Support Ieee802.3x Flow Control

Support Interface Counters

Support Port Isolation

Port Mirroring ( One-To-One, Many-To-One)

Support Loop Detection(Port-Based; Vlan-Based)

Support Broadcast Storm Suppression(Broadcast; Unknown Multicast; Unknown Unicast)

MAC Address

Table Management

Support Static MAC Address Management

Support Dynamic MAC Address Management

Support Filtering MAC Address

Support MAC Limit Based On Port And VLAN

Support MAC Flapping Based On Port And VLAN

VLAN

Support access mode

Support trunk mode

Support hybrid mode

VLAN Classification

MAC Based VLAN

IP Based VLAN

Protocol Based VLAN

GVRP

Normal mode

Fixed mode

Forbidden mode

QinQ

Port-based QinQ

VLAN-based QinQ (VLAN-stacking; VLAN-mapping)

Flow-based QinQ

LLDP

LLDP (Link Layer Discovery Protocol)

Ring Network Protocol

Support IEEE802.1D-STP

Support IEEE802.1W-RSTP

Support IEEE802.1S-MSTP

Support G.8032 ERPS protocolsingle ring, sub Ring and major ring

Recovery time ≤20ms

L2 Multicast

IGMP Snooping

Support IGMP snooping

Group Address

Support group address

Security Functions

ACL

IP Standard ACL

MAC extend ACL

IP extend ACL

IPv6 ACL

QoS

Support QoS Class, remarking

Support SP, WRR queue scheduling

Ingress port-based rate-limit

Egress port-based rate-limit

Support policy-based QoS

802.1x

Port access control

Mac-address access control

RADIUS server

Port-Security

Port-security

IP Source Guard

IP Port/MAC binding

Arp-Check

Support ARP-check and ARP packet filtering for illegal users

Access Control

Support Telnet/SSH/HTTP/HTTPS user access control

Management & Maintenance Functions

User Management

Support password protection

Support user authorization management

SNMP

Supporting SNMP V1/V2C/V3 version

Web Management

Web Management

Support HTTP V1.1

Support HTTPS

CLI Management

Console/Telnet command line management

RMON

Support RMON(Remote Monitoring) alarm

Firmware Upgrade

Firmware upgrade

Fault Detection

Ping/Tracerout

Support optical transceiver DDM function

Cable Detection

Support copper port cable detection

PoE Management

Support 802.3af/802.3at

Support PD watchdog

Support PoE priority management

Support Max PoE power configuration for each port

Support alarm waterline configuration

Support reserved power configuration

NTP

Network Time Protocol

Syslog/Debug

Syslog/Debug

Syslog send to three servers

Configuration Import/Export

Support FTP/TFTP remote import/export

Dual Partition Management

Support dual partition switching

Application Protocol Functions

DHCP Snooping

DHCP snooping trust port

Support remote-id/circuit-id configuration

DHCP option-82

DHCP Client

Support DHCP client

Telnet Server

Support telnet server

Telnet Client

Support telnet client

SSH Server

Support SSH server

TACACS

Support TACACS

(the terminal access controller accesses the control system)

Sflow

Support network traffic analysis

TFTP

Support TFTP Client

Layer 3 Functions

ARP

ARP table aging

DHCP Server

IPv4 / IPv6

static routing

ECMP

Support ECMP (Equal-cost multi-path routing)

Support the configuration of ECMP Max next-hop

Support capacity balanced configuration

Route Policy

IPv4 prefix-list

VRRP

Virtual Router Redundancy Protocol

Routing Protocol Specification

RIP

RIPv1/v2

OSPFv2

OSPFv2

BGP4

BGP4

BGP Support Routing Recursive ECMP

Support to view the number of neighbors and up/down state

IS-IS

IS-ISv4

Routing Entry

13K

Switching Features

Switching Capacity

336Gbps

Packet Forwarding Rate

499.9Mpps

MAC Address Table

16K

VLAN

4K

Buffer

12M bit

Forwarding Delay

<5us

Jumbo Frame

Support 10Kbytes

MDX/MIDX

Support

Watchdog

Support

Mechanical Structure

Installation Method

Desktop; Rack-mount

Dimension(W*D*H)mm

440*350*44mm 

Weight

6 kg

Operating Environment

Operating Temperature

0℃~+ 50

Storage/Transportation Temperature

-10℃~+ 70

Relative Humidity

Operation humidity: 10%-90%RH

Storage humidity: 5%-95%RH

Certification

CE/RoHS/FCC

MTBF

100,000 hours


Dimension



Ordering Information
Date Version Description Download
2024-09-02 V2.0 Datasheet_L3 Managed Switch 48xGE RJ45,4x10GSFP+_LA-SWM3-10G0448P-2HAC-L_V2.0 TL
Photo Model Description
Products and Solutions Inquiries