LA-SWM2R-10G0424P-AC5L is a reliable Layer 2+ managed Ethernet switch featuring 24x10/100/1000M RJ45 PoE ports and 4x1G/2.5G/10GBase-X SFP ports.
LA-SWM2R-10G0424P-AC5L is a reliable Layer 2+ managed Ethernet switch featuring 24x10/100/1000M RJ45 PoE ports and 4x1G/2.5G/10GBase-X SFP ports.
Model No. |
LA-SWM2R-10G0424P-AC5L |
Fixed Port |
24x10/100/1000M RJ45 PoE, 4x1G/2.5G/10G SFP+ |
Management Port |
1xRJ45 Console port |
Standard |
IEEE 802.3 10Base-T Ethernet
IEEE 802.3u 100Base-TX Ethernet
IEEE 802.3ab 1000Base-T Ethernet
IEEE 802.3z 1000Base-X Ethernet
IEEE802.3x Flow Control and Back Pressure
IEEE 802.1D Spanning Tree Protocol
IEEE 802.1w Rapid Spanning Tree Protocol
IEEE 802.1Q VLAN
ITU-T G.8032 ERPS
IEEE 802.1X Port Authentication Network Control
IEEE 802.1ab LLDP
IEEE 802.3ad LACP
IEEE802.3af PoE
IEEE802.3at PoE+ |
LED Indicators |
|
PWR (Power Indicator) |
Off: the device is power off or failed; On: the device power on is normal |
SYS (System Status Indicator) |
Blinking: device initialization; On: device on normal operation |
1-24 (Working Status Indicators) Green/Red/ Yellow |
Green indicator on: ports link up
Green indicator blinking: data on TX/RX (PoE not working)
Red indicator on: PoE working
Yellow indicator on: ports link up and PoE working
Yellow indicator blinking: data on TX/RX and PoE working |
25-28 (Fiber Ports Indicators) Green |
Off: ports link down; On: ports link up; Blinking: data on TX/RX |
Power Parameter |
|
Input Voltage |
AC100 ~240V, 50/60Hz |
Total Power Consumption |
Full loading without PoE≤24W; PoE power budget ≤ 248W |
Over-Current Protection |
Support |
Layer 2 Functions |
|
Port Aggregation |
Support GE port aggregation
Support 2.5GE aggregation
Support 10GE aggregation
Support static aggregation
Support LACP dynamic aggregation
Up to 64 aggregation groups and up to 8 ports per group |
Port Features |
Support IEEE802.3x flow control,
Support interface counters,
Support port isolation, port mirroring (One-to-One, Many-to-One)
Support loop detection (Port-based; VLAN-based)
Support broadcast storm suppression (broadcast; unknown multicast; unknown unicast) |
Mac-Address Table Management |
Support static Mac-address management
Support dynamic Mac-address Management
Support filtering Mac-address
Support MAC limit based on port and VLAN
Support MAC flapping based on port and VLAN |
VLAN |
Support access mode; Support trunk mode; Support hybrid mode |
VLAN classification |
Mac Based VLAN; IP Based VLAN; Protocol Based VLAN |
GVRP |
Normal mode; Fixed mode; Forbidden mode |
QinQ |
Port-based QinQ
VLAN-based QinQ (VLAN-stacking; VLAN-mapping)
Flow-based QinQ |
LLDP |
LLDP (Link Layer Discovery Protocol) |
Ring Network Protocol |
Support IEEE802.1D-STP
Support IEEE802.1W-RSTP
Support IEEE802.1S-MSTP
Support G.8032 ERPS protocol, single ring, sub-Ring and major ring
Recovery time ≤20ms |
L2 Multicast |
|
IGMP Snooping |
Support IGMP snooping |
Group Address |
Support group address |
Security Functions |
|
ACL |
IP Standard ACL
MAC extend ACL
IP extend ACL
IPv6 ACL |
QoS |
Support QoS Class, remarking
Support SP, WRR queue scheduling
Ingress port-based rate-limit
Egress port-based rate-limit
Support policy-based QoS |
802.1x |
Port access control
Mac-address access control
RADIUS server |
Port-Security |
Port-security |
IP Source Guard |
IP Port/MAC binding |
ARP-check |
Support ARP-check and ARP packet filtering for illegal users |
Access control |
Support Telnet/SSH/HTTP/HTTPS user access control |
Management & Maintenance Functions |
|
User Management |
Support password protection
Support user authorization management |
SNMP |
Supporting SNMP V1/V2C/V3 version |
Web Management |
Web Management
Support HTTP V1.1
Support HTTPS |
CLI Management |
Console/Telnet command line management |
RMON |
Support RMON (Remote Monitoring) alarm |
Firmware Upgrade |
Firmware upgrade |
Fault Detection |
Ping/Tracerout
Support optical transceiver DDM function |
Cable Detection |
Support copper port cable detection |
PoE Management |
Support 802.3af/802.3at
Support PD watchdog
Support PoE priority management
Support Max PoE power configuration for each port
Support alarm waterline configuration
Support reserved power configuration |
NTP |
Network Time Protocol |
Syslog/Debug |
Syslog/Debug; Syslog sends to three servers |
Configuration Import/Export |
Support FTP/TFTP remote import/export |
Dual Partition Management |
Support dual partition switching |
Application Protocol Functions |
|
DHCP Snooping |
DHCP snooping trust port
Support remote-id/circuit-id configuration
DHCP option-82 |
DHCP Client |
Support DHCP client |
Telnet Server |
Support telnet server |
Telnet Client |
Support telnet client |
SSH Server |
Support SSH server |
TACACS |
Support TACACS (the terminal access controller accesses the control system) |
sflow |
Support network traffic analysis |
TFTP |
Support TFTP Client |
Layer 3 Functions |
|
ARP |
ARP table aging |
DHCP Server |
|
IPv4 / IPv6 |
static routing |
Switching Features |
|
Switching Capacity |
128Gbps |
Packet Forwarding Rate |
190Mpps |
MAC Address Table |
16K |
VLAN |
4K |
Buffer |
12Mbit |
Forwarding Delay |
<5us |
Jumbo Frame |
Support 10Kbytes |
MDX/MIDX |
Support |
Watchdog |
Support |
Mechanical Structure |
|
Installation Method |
Desktop; Rack-mount |
Dimension (W x D x H) |
440x180x45mm |
Weight |
3.2kg |
Operating Environment |
|
Operating Temperature |
0℃~+50℃ |
Storage Temperature |
-10℃~+70℃ |
Relative Humidity |
Operation humidity: 10%-90%RH; Storage humidity: 5%-95%RH |
Certification |
CE/RoHS/FCC |
MTBF |
> 100,000 hours |
Dimension
Ordering Information | |
---|---|
LA-SWM2R-10G0424P-AC5L | L2+ Managed PoE switch 24x10/100/1000M RJ45 PoE, Uplink 4X1G/2.5G/10G SFP+ ports AC100~240V Input; Total power consumption 280W |
Date | Version | Description | Download |
---|---|---|---|
2024-06-26 | v1.3 | Datasheet_L2+ Managed PoE Switch 24x1G RJ45, 4x1G 2.5G 10G SFP+, LA-SWM2R-10G0424P-AC5L_V1.3 TL.pdf | |
Photo | Model | Description |
---|