|
Fixed Port
|
24x10/100/1000Base-T RJ45 PoE, 4x1G/2.5G/10GBase-X SFP+
|
|
Management Port
|
1xRJ45 Console port (115200,8,N,1)
1xUSB 2.0 for configuration and firmware
|
|
Data & Alarm Channel(optional)
|
1 channel RS485
1 channel DI(digital input)
1 channel DO(digital output)
|
|
Standard
|
IEEE 802.3 10Base-T Ethernet
IEEE 802.3u 100Base-TX Ethernet
IEEE 802.3ab 1000Base-T Ethernet
IEEE 802.3z 1000Base-X Ethernet
IEEE802.3x Flow Control and Back Pressure
IEEE 802.1D Spanning Tree Protocol
IEEE 802.1w Rapid Spanning Tree Protocol
IEEE 802.1Q VLAN
ITU-T G.8032 ERPS
IEEE 802.1X Port Authentication Network Control
IEEE 802.1ab LLDP
IEEE 802.3ad LACP
IEEE802.3af PoE
IEEE802.3at PoE+
|
|
LED Indicators
|
|
P1/P2 (Power indicator)
|
Off: device is power off or failed
|
On: device power on is normal
|
|
SYS (System status indicator)
|
Blinking: device initialization
|
On: device on normal operation
|
|
USB (USB status indicator)
|
Off: USB flash drive not or not detected by device
|
|
On: USB flash drive is detected by device
|
|
Blinking: device is reading and writing the data from USB flash drive
|
|
ALM (Fault status indicator) Red
|
Off: Device on normal working state
|
On: Fault alarm
|
|
Ring (Ring network indicator)
|
Off: Ring network disable
|
On: Ring network enable
|
|
1-24
(Copper ports indicators) Green
|
Off: ports link down
|
|
On: ports link up
|
|
Blinking: data on TX/RX
|
|
1-24 (PoE status indicators) Yellow
|
Off: PoE not working
|
|
On: PoE working
|
|
25-28 (Fiber ports indicators) Green
|
Off: ports link down
|
|
On: ports link up
|
|
Blinking: data on TX/RX
|
|
Power Parameter
|
|
Input Voltage
|
DC 44~57V(802.3af)
DC 52~57V(802.3at)
redundant power input
|
|
Input Current
|
6.2A DC/DC input Max
|
|
Total Power Consumption
|
Full loading without PoE≤26W
Single power input: PoE power budget ≤240W (-40℃~+ 70℃)
Dual power input: PoE power budget ≤370W (-40℃~+ 60℃)
*Dual power input must be the same as DC voltage
|
|
Connector
|
Removable 2-pin terminal block
|
|
Reverse Polarity Protection
|
Support
|
|
Over-Voltage Protection
|
Support
|
|
Over-Current Protection
|
Support
|
|
Layer 2 Functions
|
|
Port Aggregation
|
Support GE port aggregation
Support 2.5GE aggregation
Support 10GE aggregation
Support static aggregation
Support LACP dynamic aggregation
Up to 64 aggregation groups and up to 8 ports per group
|
|
Port Features
|
Support IEEE802.3x flow control
Support interface counters
Support port isolation
Port mirroring ( One-to-One, Many-to-One)
Support loop detection(Port-based; VLAN-based)
Support broadcast storm suppression
(broadcast; unknown multicast; unknown unicast)
|
|
Mac-Address
Table Management
|
Support static Mac-address management
Support dynamic Mac-address Management
Support filtering Mac-address
Support MAC limit based on port and VLAN
Support MAC flapping based on port and VLAN
|
|
VLAN
|
Support access mode
Support trunk mode
Support hybrid mode
|
|
VLAN Classification
|
Mac Based VLAN
IP Based VLAN
Protocol Based VLAN
|
|
GVRP
|
Normal mode
Fixed mode
Forbidden mode
|
|
QinQ
|
Port-based QinQ
VLAN-based QinQ (VLAN-stacking; VLAN-mapping)
Flow-based QinQ
|
|
LLDP
|
LLDP (Link Layer Discovery Protocol)
|
|
Ring Network Protocol
|
Support IEEE802.1D-STP
Support IEEE802.1W-RSTP
Support IEEE802.1S-MSTP
|
|
Support G.8032 ERPS protocol, single ring, sub Ring and major ring
Recovery time ≤20ms
|
|
L2 Multicast
|
|
IGMP Snooping
|
Support IGMP snooping
|
|
Group Address
|
Support group address
|
|
Security Functions
|
|
ACL
|
IP Standard ACL
MAC extend ACL
IP extend ACL
IPv6 ACL
|
|
QoS
|
Support QoS Class, remarking
Support SP, WRR queue scheduling
Ingress port-based rate-limit
Egress port-based rate-limit
Support policy-based QoS
|
|
802.1x
|
Port access control
Mac-address access control
RADIUS server
|
|
Port-Security
|
Port-security
|
|
IP Source Guard
|
IP Port/MAC binding
|
|
ARP-check
|
Support ARP-check and ARP packet filtering for illegal users
|
|
Access Control
|
Support Telnet/SSH/HTTP/HTTPS user access control
|
|
Management & Maintenance functions
|
|
User Management
|
Support password protection
Support user authorization management
|
|
SNMP
|
Supporting SNMP V1/V2C/V3 version
|
|
Web Management
|
Web Management
Support HTTP V1.1
Support HTTPS
|
|
CLI Management
|
Console/Telnet command line management
|
|
RMON
|
Support RMON(Remote Monitoring) alarm
|
|
Firmware Upgrade
|
Firmware upgrade
|
|
Fault Detection
|
Ping/Traceroute
Dying gasp
Support optical transceiver DDM function
|
|
Cable Detection
|
Support copper port cable detection
|
|
PoE management
|
Support 802.3af/802.3at
|
|
Support PD watchdog
|
|
Support PoE priority management
|
|
Support Max PoE power configuration for each port
|
|
Support alarm waterline configuration
|
|
Support reserved power configuration
|
|
NTP
|
Network Time Protocol
|
|
Syslog/Debug
|
Syslog/Debug
Syslog send to three servers
|
|
Configuration Import/Export
|
Support FTP/TFTP remote import/export
Support USB import/export
|
|
Dual Partition Management
|
Support dual partition switching
|
|
Application Protocol Functions
|
|
DHCP Snooping
|
DHCP snooping trust port
Support remote-id/circuit-id configuration
DHCP option-82
|
|
DHCP Client
|
Support DHCP client
|
|
Telnet Server
|
Support telnet server
|
|
Telnet Client
|
Support telnet client
|
|
SSH Server
|
Support SSH server
|
|
TACACS
|
Support TACACS(the terminal access controller accesses the control system)
|
|
Sflow
|
Support network traffic analysis
|
|
TFTP
|
Support TFTP Client
|
|
Layer 3 Functions
|
|
ARP
|
ARP table aging
|
|
DHCP Server
|
|
IPv4 / IPv6
|
Static routing
|
|
ECMP
|
Support ECMP (Equal-cost multi-path routing)
|
|
Support the configuration of ECMP Max next-hop
|
|
Support capacity balanced configuration
|
|
Route policy
|
IPv4 prefix-list
|
|
VRRP
|
Virtual Router Redundancy Protocol
|
|
Routing Protocol Specification
|
|
RIP
|
RIPv1/v2
|
|
OSPFv2
|
OSPFv2
|
|
BGP4
|
BGP4
|
|
BGP Support Routing Recursive ECMP
|
|
Support to view the number of neighbors and up/down state
|
|
IS-IS
|
IS-ISv4
|
|
Routing entry
|
13K
|
|
Switching features
|
|
Switching Capacity
|
128Gbps
|
|
Packet Forwarding Rate
|
190.4Mpps
|
|
MAC Address Table
|
16K
|
|
VLAN
|
4K
|
|
Buffer
|
12M bit
|
|
Forwarding Delay
|
<5us
|
|
Jumbo Frame
|
Support 10Kbytes
|
|
MDX/MIDX
|
Support
|
|
Watchdog
|
Support
|
|
Mechanical Structure
|
|
Case Protection
|
IP40
|
|
Installation Method
|
Din-rail
|
|
Dimension(W*D*H)mm
|
110*115*158mm
|
|
Weight
|
LA-IS8M3-10G0424PB-L: 2.3kg;
LA-IS8M3-10G0424PB-UR-L: 2.4kg
|
|
Operating Environment
|
|
Operating Temperature
|
-40℃~+ 75℃
|
|
Storage/Transportation Temperature
|
-40℃~+ 85℃
|
|
Relative Humidity
|
Operation humidity: 10%-90%RH
Storage humidity: 5%-95%RH
|
|
Industrial Standard
|
|
EMS
|
Surge protection of power: IEC 61000-4-5 DC:6KV/6KV (8/20us)
Surge protection of Ethernet ports: IEC 61000-4-5 6KV/2KV（10/700us）
RS: IEC 61000-4-3 80 MHz-1 GHz: 10 V/m
EFT: IEC 61000-4-4 power 4K, signal 2K
CS: IEC 61000-4-6 10V
ESD: IEC 61000-4-2 Contact: 8K; Air: 15K
|
|
EMI
|
FCC Part 15B Class A
|
|
Shock
|
IEC 60068-2-27
|
|
Free Fall
|
IEC 60068-2-32
|
|
Vibration
|
IEC 60068-2-6
|
|
Certification
|
CCC/CE/UKCA/RoHS/REACH/FCC
|
|
MTBF
|
>200,000 hours
|
