LA-SWM3-DC100G08X10G48B is 48x10G and 8x100G QSFP28/40G QSFP+ high Top-of-Rack (TOR) or spine data center switch. In a compact 1RU form factor.
LA-SWM3-DC100G08X10G48B is 48x10G and 8x100G QSFP28/40G QSFP+ high Top-of-Rack (TOR) or spine data center switch. In a compact 1RU form factor.
LA-SWM3-DC100G08X10G48B is 48x10G and 8x100G QSFP28/40G QSFP+ high Top-of-Rack (TOR) or spine data center switch. In a compact 1RU form factor, the switch provides line-rate L2 and L3 switching, each QSFP28 port can be configured as 1x100G, 1x40G, or via DAC breakout cables 2x50G, 4x25G, 4x10G. The switch is designed with hot/cold aisles with port-to-power and power-to-port airflow SKUs all ports on front, with dual hot-swappable PSU and hot-swappable 4 cooling fans accessible from rear.
It is high port density, and low latency for cloud-oriented data center networks and high-end campus networks, supports an extensive range of data center features, SDN (Software Defined Networks) capabilities, stacking technologies. It is featured with VXLAN, EVPN, M-Lag, VLAN, MAC, Routing, QoS, IPv6, STP/RSTP/MSTP, which nables you to build scalable, simplified, open, and secure networks for high-performance computing clusters and high-frequency trading applications, supporting 10G to servers with 40/100G uplinks, or as a spine switch supporting 40/100G spine interconnects.
High Reliability
It provides enhanced Ethernet reliability technologies such as STP/RSTP/MSTP, R-link at millisecond-level protection switchover, as well as LB (loopback check) to ensure link-level reliability. Support 1+1 redundant hot swappable power supply and an AC power supply and a DC power can be used simultaneously. Moreover, the switch supports fault detection and alarms for power modules and fan, fan speed can be automatically adjusted according to temperature variations.
High Switching Capacity
The backplane capacity is up to 2.56Tbps to provide all ports with non-stop forwarding. It high performance makes sure to build a reliable, sustainable high speed IP networks. It provided high density 10/40/100G port. It can meet the high density, high bandwidth access and aggregation application scenarios of data center and campus network.
Powerful Services Support
It supports IGMP snooping, IGMP proxy, IGMP filter, and IGMP fast leave for robust multicast. It offers wire-speed replication of multicast packets between VLANs, and multicast load balancing among trunk member interfaces to meet requirements for IPTV services and other multicast services.
Superior Quality of Service
It offers Gigabit Ethernet with intelligent services that keep everything flowing smoothly with mechanisms for marking, classification, and scheduling. It supports traffic classification based on abundant criteria such as MAC/IP address, Layer 4 TCP/UDP port number, protocol, port and VLAN. Each port supports 8 priority queues with multiple queue scheduling algorithms such as SP/PQ, DRR, SP/PQ+DRR to ensure the highest-priority packets are processed ahead of all other traffic.
Advanced Security
It offers a comprehensive security solution by providing service security in three aspects: subscriber, switch and network. Subscriber security helps protections among customers with multiple features. DHCP Snooping, ARP Inspection, and IP Source Guard help to identify each customer based on MAC, IP address and port information to help prevent malicious attack. Switch security means CPU can be protected from DoS attack and storm. The port security feature allows controlling the number of MAC addresses against overwhelming the switch memory. Network security is to filter all incoming traffic for ensuring only valid traffic passing through by applying different ACL rules and IEEE 802.1x authentication prevents insecure terminals to intrude illegally into the entire network.
Provided Fix Ports |
48x10G SFP+, 8x40/100G QSFP28 |
Management Ports |
1x RJ45 100/1000Base-T out-of-band
1x RJ45 Console, 1x USB Type A |
Main Chip |
Broadcom BCM56771 |
CPU |
NXP LS1046A |
Throughput |
1000Mpps |
Switching capacity |
2.56Tbps |
VLAN |
4K VLANs; 1:1 & 2:2 VLAN Mapping; QinQ, ive QinQ; MAC based VLAN; Protocols based VLAN; Guest VLAN; Voice VLAN |
Port trunk |
LACP; 32 trunk groups at most, up to 8 ports in each group |
MAC |
128K MAC; Static MAC; Dynamic MAC; |
IP routing |
Static Routing; OSPF; ISIS; BGP, GRE |
Multicast |
IGMP snooping, IGMP filter, IGMP Proxy and IGMP fast leave;
Multicast replication between VLANs; PIM-SM; PIM-DM; Source Specific Multicast (SSM) |
Reliability |
STP, RSTP, MSTP; R-Link protection, VRRP, Trunk, Redundancy power
BPDU Guard, Loop protection, Root protection; |
QoS/ACL |
Packet filtering at Layer 2 to Layer 4, filtering out invalid frames based on source MAC address, destination MAC address, source IP address, destination IP address, TCP/UDP port number, protocol type and VLAN ID |
Time range ACL |
|
Rate limiting with granularity at 64Kbps |
|
Port-based traffic policing and two-rate three-color CAR |
|
8 queues on each port |
|
Flexible scheduling algorithms, including SP/PQ/DRR/SP/PQ+DRR |
|
Re-marking of the 802.1p priority and DSCP priority |
|
Security |
User privilege management and password protection |
DoS attack defense, ARP attack defense, IP source guard |
|
Binding of the IP address, MAC address, interface |
|
Port isolation, Port security |
|
Black hole MAC address entries |
|
Limit on number of learned MAC addresses |
|
802.1x authentication, RADIUS authentication |
|
SSH v2.0 |
|
CPU protection |
|
Data Center Feature |
EVPN, VXLAN, M-Lag |
Energy Saving |
Dynamic fan speed adjusting |
Management
& Maintenance |
Port mirroring and Flow-based mirroring |
Configuration via CLI, Telnet, Console port |
|
SNMP v1/v2/v3, RMON, LLDP, Cluster network, Syslog, Traplog |
|
Third-Party GUI management platform based on SNMP |
|
Loading and upgrade via FTP/TFTP |
|
Port loopback detection |
|
Operating Environment |
Operation temperature: 0℃ to 45℃
Relative humidity: 10%-90% (non-condensing) |
Input Voltage |
AC: Rated voltage range: 100V to 240V AC, 50/60Hz
Maximum voltage range: 90V to 264V AC, 50/60Hz |
DC: Rated voltage range: -48V to -60V DC
Max voltage range: -36V to -72V DC |
|
Dimensions (W×D×H) |
440x400x44mm |
Power Consumption |
≤200W |
N.W. |
8.1KG |
Ordering Information | |
---|---|
LA-SWM3-DC100G08X10G48B | Data Center Managed Switch 48 x 10G SFP+, 8 x 100G QSFP28/40G QSFP+ |
Date | Version | Description | Download |
---|---|---|---|
2024-04-26 | V4.0 | Datasheet_Data Center Managed Switch_LA-SWM3-DC100G08X10G48B_Lanao Comm V.4.0.pdf | |
Photo | Model | Description |
---|