LA-IS7M-2.5G0408-U-R is highly reliable managed industrial Ethernet switches with 8-port 10/100/1000-T RJ45 and 4-port 1000/2500Base-X SFP slots.
LA-IS7M-2.5G0408-U-R is highly reliable managed industrial Ethernet switches with 8-port 10/100/1000-T RJ45 and 4-port 1000/2500Base-X SFP slots.
LA-IS7M-2.5G0408-U-R is highly reliable managed industrial Ethernet switches with 8-port 10/100/1000-T RJ45 and 4-port 1000/2500Base-X SFP slots. It supports ERPS redundant network and the self-recovery mechanism is less than 20ms on full load which allows you to scheme a reliable Ethernet network by building a redundant ring topology as your back-up solution. LA-IS7M-G0408P-E also support DI/DO/RS485/
Modbus data and robust layer 2 management function, which can fulfill the special needs of industrial automation applications.
As high cost-effective easy-to-use devices, it can provide essential industrial Ethernet networking function, including wide range power input 12-58VDC, redundant power design with polarity reverse protection, robust IP40 fan-less housing with Din-rail installation, wide operation temperature from -40°C to 75°C as well as high-level EMI/EMC capability. It’s the best choice for heavy industrial factory, transportation, oil & gas, chemical, IP Surveillance and processing automation area where environmental conditions are harsh and critical.
8*10/100/1000Base-T RJ45 ports
4*1000/2500Base-X SFP slots
Redundant power 12-58V input with polarity reverse/over-voltage/current protection
Support USB configuration and upgrading Support DI/DO/RS485/Modbus data
Support Layer 2 management function: VLAN/VLAN Classification/QinQ/STP, RSTP,MSTP/Port Mirroring/DHCP/
Multicast/ACL/IGMP/QoS/LLDP/802.1X/Dying Gasp/SFPDDM/IPV6 management/Web/SNMP/Telnet/TFTP/
Web upgrading G.8032 ERPS protocol, recovery≤15ms
Support 6KV surge protection and ESD: Air-15kV, Contact-8kV Protection
Model No. |
LA-IS7M-2.5G0408-U-R |
|
Interface
|
Fiber ports |
Copper RJ45 ports |
4 |
8 |
|
Ethernet |
8*10/100/1000Base-T RJ45 4*1000/2500Base-X SFP |
|
Management port |
1*RJ45 Console port, 1*USB 2.0 |
|
Data channel |
1 channel RS485 1 channel DI(digital input) 1 channel DO(digital output) |
|
Standard |
IEEE 802.3 10Base-T Ethernet IEEE 802.3u 100Base-TX Ethernet IEEE 802.3ab 1000Base-T Ethernet IEEE 802.3z 1000Base-X Ethernet IEEE802.3x Flow Control and Back Pressure IEEE 802.1D Spanning Tree Protocol IEEE 802.1w Rapid Spanning Tree Protocol IEEE 802.1Q VLAN ITU-T G.8032 ERPS IEEE 802.1X Port Authentication Network Control IEEE 802.1ab LLDP IEEE 802.3ad LACP |
|
LED Indicators |
||
P (Power indicator) |
Off: the device is power off or failed |
On: the device power on is normal |
S(System status indicator) |
Blinking: device initialization |
On: device on normal operation |
USB (USB status indicator) |
Off: USB flash drive not or not detected by device On: USB flash drive is detected by device Blinking: the device is reading and writing the data from USB flash drive |
|
ALM(Fault status indicator) Red |
Off: Device on normal working state |
On: Fault alarm |
1-8 (Copper ports indicators) Green |
Off: ports link down On: ports link up Blinking: data on TX/RX |
|
1-8(Port speed indicators) Yellow |
Off: ports on 10/100M On: ports on 1000M |
|
9-10(Fiber ports indicators) Green |
Off: ports link down On: ports link up Blinking: data on TX/RX |
|
Power parameter |
Input voltage |
12-58VDC, redundant power input |
Input current |
1.2A Max |
Total power consumption |
Full loading ≤15W |
Connector |
Removable 4-pin terminal block |
Reverse polarity protection |
Support |
Over-voltage protection |
Support |
Over-current protection |
Support |
Layer 2 function |
|
Port aggregation |
Support GE port aggregation Support 2.5GE aggregation Support static aggregation Support dynamic aggregation |
Port features |
Support IEEE802.3x flow control, Support port traffic statistics, Support port isolation Support network storm suppression based on port bandwidth percentage |
VLAN Classification |
Mac Based VLAN IP Based VLAN Protocol Based VLAN |
QinQ |
Port-based QinQ VLAN-based QinQ Flow-based QinQ |
Port mirroring |
Many to one port mirroring |
Ring network protocol |
Support STP、RSTP、MSTP Support G.8032 ERPS protocol, single ring, sub Ring and associated sub ring Recovery time ≤20ms |
DHCP |
Support DHCP Client Support DHCP Snooping |
Multicast |
IGMP V1,V2,V3 IGMP snooping |
ACL |
IP Standard ACL MAC extend ACL IP extend ACL |
QoS |
Support QoS Class, Remarking Support SP, WRR queue scheduling Ingress Port-based Rate-limit Egress Port-based Rate-limit Support Policy-based QoS |
Security |
Support Dot1x, port authentication, MAC authentication, RADIUS service Support port-security Support IP Source Guard, IP/Port/MAC binding Support ARP-check and ARP packet filtering for illegal users Support port isolation |
Management & maintenance Support LLDP |
Support user management and login authentication Support SNMPV1/V2C/V3 Support web management, HTTP1.1, HTTPS Support Syslog and alarm grading Support RMON(Remote Monitoring) alarm Support NTP Support temperature monitoring Support Ping , TRACERT Support optical transceiver DDM function Support TFTP Client Support Telnet Server Support SSH Server Support IPv6 Management Support TFTP, web upgrading Support USB upgrading Support USB importing configuration |
Switching features |
|
Switching capacity |
36Gbps |
Packet forwarding rate |
53.5Mpps |
MAC address table |
16K |
VLAN |
4K |
Buffer |
12M bit |
Forwarding delay |
<5us |
Jumbo Frame |
Support 10Kbytes |
MDX/MIDX |
Support |
Watchdog |
Support |
Mechanical structure |
|
Case protection |
IP40 |
Installation method |
Din-rail |
Dimension(W*D*H)mm |
54*115*158mm |
Weight |
1.35kg |
Operating environment |
|
Operating temperature |
-40℃~+75℃ |
Storage/transportation temperature |
-40℃~+85℃ |
Relative humidity |
Operation humidity: 10%-90%RH Storage humidity: 5%-95%RH |
Industrial Standard |
|
EMS |
Surge protection of power: IEC 61000-4-5 6KV/4KV(8/20us) Surge protection of Ethernet ports: IEC 61000-4-5 6KV/2KV(10/700us) RS:IEC 61000-4-3 80 MHz-1 GHz:10 V/m EFT:IEC 61000-4-4 4K/2K CS:IEC 61000-4-6 10V ESD:IEC 61000-4-2 Contact: 8K;Air: 15K |
EMI |
FCC Part 15B Class A |
Shock |
IEC 60068-2-27 |
Free fall |
IEC 60068-2-32 |
Vibration |
IEC 60068-2-6 |
Certification |
CE/FCC/RoHS |
Warranty |
3 years |
Ordering Information |
---|
Photo | Model | Description |
---|