LA-IS7M-2.5G0208-U-R is highly reliable managed industrial Ethernet switch with 8-port 10/100/1000-T RJ45 and 2-port 1000/2500Base-X fiber optical interfaces. They support ERPS redundant network and the self-recovery mechanism is less than 20ms on full load which allows you to scheme a reliable Ethernet network by building a redundant ring topology as your back-up solution. It also support DI/DO/RS485/
Modbus data and robust layer 2 management function, which can fulfill the special needs of industrial automation applications.
As high cost-effective easy-to-use devices, it can provide essential industrial Ethernet networking function, including wide range power input 12-58VDC, redundant power design with polarity reverse protection, robust IP40 fan-less housing with Din-rail installation, wide operation temperature from -40°C to 75°C as well as high-level EMI/EMC capability. It’s the best choice for heavy industrial factory, transportation, oil & gas, chemical, IP Surveillance and processing automation area where environmental conditions are harsh and critical.
8*10/100/1000Base-T RJ45 ports
2*1000/2500Base-X SFP slots
Redundant power 12-58V input with polarity reverse/over-voltage/current protection
Support USB configuration and upgrading
Support DI/DO/RS485/Modbus data
Support Layer 2 management function: VLAN/VLAN Classification/QinQ/STP, RSTP, MSTP/Port Mirroring/DHCP/Multicast/ACL/
IGMP/QoS/LLDP/802.1X/Dying Gasp/SFPDDM/IPV6 management/Web/SNMP/Telnet/TFTP/Web upgrading
G.8032 ERPS protocol, recovery≤15ms
Support 6KV surge protection and ESD: Air-15kV, Contact-8kV Protection
Model No. | LA-IS7M-2.5G0208-U-R | |
Fiber ports | Copper RJ45 ports | |
Interface | ||
2 | 8 | |
Ethernet | 8*10/100/1000Base-T RJ45 | |
2*1000/2500Base-X SFP | ||
Management port | 1*RJ45 Console port, 1*USB 2.0 | |
Data channel | 1 channel RS485 | |
Standard | IEEE 802.3 10Base-T Ethernet | |
IEEE 802.3u 100Base-TX Ethernet | ||
IEEE 802.3ab 1000Base-T Ethernet | ||
IEEE 802.3z 1000Base-X Ethernet | ||
IEEE802.3x Flow Control and Back Pressure | ||
IEEE 802.1D Spanning Tree Protocol | ||
IEEE 802.1w Rapid Spanning Tree Protocol | ||
IEEE 802.1Q VLAN | ||
ITU-T G.8032 ERPS | ||
IEEE 802.1X Port Authentication Network Control | ||
IEEE 802.1ab LLDP | ||
IEEE 802.3ad LACP | ||
LED Indicators | ||
P (Power indicator) | Off: the device is power off or failed | On: the device power on is normal |
S(System status indicator) | Blinking: device initialization | On: device on normal operation |
USB (USB status indicator) | Off: USB flash drive not or not detected by device | |
On: USB flash drive is detected by device | ||
Blinking: the device is reading and writing the data from USB flash drive | ||
ALM(Fault status indicator) Red | Off: Device on normal working state | On: Fault alarm |
1-8 (Copper ports indicators) Green | Off: ports link down | |
On: ports link up | ||
Blinking: data on TX/RX | ||
1-8(Port speed indicators) Yellow | Off: ports on 10/100M | |
On: ports on 1000M | ||
9-10(Fiber ports indicators) Green | Off: ports link down | |
On: ports link up | ||
Blinking: data on TX/RX | ||
Power Parameter | ||
Input voltage | 12-58VDC, redundant power input | |
Input current | 0.9A Max | |
Total power consumption | Full loading ≤10W | |
Connector | Removable 4-pin terminal block | |
Reverse polarity protection | Support | |
Over-voltage protection | Support | |
Over-current protection | Support | |
Layer 2 Function | ||
Port aggregation | Support GE port aggregation | |
Support 2.5GE aggregation | ||
Support static aggregation | ||
Support dynamic aggregation | ||
Port features | Support IEEE802.3x flow control, | |
Support port traffic statistics, | ||
Support port isolation | ||
Support network storm suppression based on port bandwidth percentage | ||
VLAN Classification | Mac Based VLAN | |
IP Based VLAN | ||
Protocol Based VLAN | ||
QinQ | Port-based QinQ | |
VLAN-based QinQ | ||
Flow-based QinQ | ||
Port mirroring | Many to one port mirroring | |
Ring network protocol | Support STP、RSTP、MSTP | |
Support G.8032 ERPS protocol, single ring, sub Ring and associated sub ring | ||
Recovery time ≤20ms | ||
DHCP | Support DHCP Client | |
Support DHCP Snooping | ||
Multicast | IGMP V1,V2,V3 | |
IGMP snooping | ||
ACL | IP Standard ACL | |
MAC extend ACL | ||
IP extend ACL | ||
QoS | Support QoS Class, Remarking | |
Support SP, WRR queue scheduling | ||
Ingress Port-based Rate-limit | ||
Egress Port-based Rate-limit | ||
Support Policy-based QoS | ||
Security | Support Dot1x, port authentication, MAC authentication, RADIUS service | |
Support port-security | ||
Support IP Source Guard, IP/Port/MAC binding | ||
Support ARP-check and ARP packet filtering for illegal users | ||
Support port isolation | ||
Management & maintenance | Support LLDP | |
Support LLDP | Support user management and login authentication | |
Support SNMPV1/V2C/V3 | ||
Support web management, HTTP1.1, HTTPS | ||
Support Syslog and alarm grading | ||
Support RMON(Remote Monitoring) alarm | ||
Support NTP | ||
Support temperature monitoring | ||
Support Ping , TRACERT | ||
Support optical transceiver DDM function | ||
Support TFTP Client | ||
Support Telnet Server | ||
Support SSH Server | ||
Support IPv6 Management | ||
Support TFTP, web upgrading | ||
Support USB upgrading | ||
Support USB importing configuration | ||
Switching Features | 1*RJ45 Console port, 1*USB 2.0 | |
Switching capacity | 26Gbps | |
MAC address table | 16K | |
Buffer | 12Mbit | |
Forwarding delay | <5us | |
Jumbo Frame | Support 10Kbytes | |
MDX/MIDX | Support | |
Watchdog | Support | |
Mechanical Structure | ||
Case protection | IP40 | |
Installation method | Din-rail | |
Dimension(W*D*H)mm | 54*115*158mm | |
Weight | 1.28 kg | |
Operating environment | ||
Operating temperature | -40℃~+75℃ | |
Storage/transportation temperature | -40℃~+85℃ | |
Relative humidity | Operation humidity: 10%-90%RH | |
Storage humidity: 5%-95%RH | ||
Industrial Standard | ||
EMS | Surge protection of power: IEC 61000-4-5 6KV/4KV(8/20us) | |
Surge protection of Ethernet ports: IEC 61000-4-5 6KV/2KV(10/700us) | ||
RS:IEC 61000-4-3 80 MHz-1 GHz:10 V/m | ||
EFT:IEC 61000-4-4 4K/2K | ||
CS:IEC 61000-4-6 10V | ||
ESD:IEC 61000-4-2 Contact: 8K;Air: 15K | ||
EMI | FCC Part 15B Class A | |
Shock | IEC 60068-2-27 | |
Free fall | IEC 60068-2-32 | |
Vibration | IEC 60068-2-6 | |
Certification | CE/FCC/RoHS | |
Warranty | 3 years |
Subscribe now, you can get over 100 valuable resources and white papers.
Follow us also can get the latest products and industry information in our members emails. Learn Details>>>